43
CK 2301 DCF radio-controlled clock
English
Auto-stop function
If you do not press a button, the alarm switches off
automatically after 2 minutes.
After 24 hours, the alarm will be triggered again.
Interrupting the alarm for 24 hours
− Press any button (except ) to interrupt the
alarm. After 24 hours, the alarm will be triggered
again.
Repeat alarm (SNOOZE function)
− Press the sensor field once when the alarm
signal sounds. Indications
or and flash
on the display.
The device will switch on again according to the
selected setting (the default setting is 5 minutes) to
wake you up again. This procedure can be repeated
multiple times.
Display illumination
Illuminating the display
− Press the sensor field to turn on the
display backlight for approx. 8 seconds.
Using the night light function
− Holding the sensor field for more than
3 seconds shows
on the display and turns on
the automatic brightness adjustment.
To Next Page
Loading...