BEWARE of material damage
Place the scales on a stable, even surface.
Do not overload the scales. Pay attention to the
“Technical Data”.
Place objects on the scales exclusively for the purpose
of weighing.
Protect the scales from sharp jolts and vibrations.
Remove the batteries from the scales if they have been
used up or if you are not going to use the scales for a
long time. You will thus avoid damage that may result
from the leakage of battery acid.
When inserting and changing batteries, pay attention
to the correct polarity (+/-).
Do not subject the batteries to extreme conditions by,
for example, storing them on heaters or under direct
sunlight. Increased risk of leakage!
Clean the battery and device contacts, as needed,
before inserting the battery.
Only insert batteries of the same type; do not use
dierent types or used and new batteries with each
other.
Do not make any modications to the item. Only allow
repairs to be carried out at a specialist workshop.
Repairs carried out incorrectly can considerably
endanger the user.
Druckbuch FRED.indb 23 28.11.2017 12:24:02
To Next Page
Loading...
