ADE Fred TE 1700 - Display Light and Scale Power Off; Resetting the Scales

29
English
If the weight on the weighing surface is
greater than 50grams, “TARE” is shown on the
display (tare function).
2. Add the new substance. The weight of the added
substance is shown on the display.
Switching off the display light
To save battery power, you can switch off the display light.
− Press the
button to switch the display light o and
back on.
Switching off the scales
− Press the button to switch o the scales.
The scales automatically switch off after a few
seconds when it is no longer being used.
Resetting the scales
Reset the scales to factory settings if unusual or obviously
incorrect values are shown on the display.
1. Remove the batteries from the battery compartment
and wait a moment.
2. Re-insert the batteries.
Pay attention to the correct polarity of the
batteries (+/-).
After switching the scales on, you can start weighing as
usual.
Druckbuch FRED.indb 29 28.11.2017 12:24:02