Page 24 of 120
M320600-01+02-210429-Rev004-UM-en
- Never move the scale back and forth at the place of use as this may cause damage to the load
cells.
- Operate the device only within the permissible ambient conditions.
- Do not expose the scale to high temperatures, whether from neighbouring devices or direct
sunlight. The liquid crystal display may suffer damage.
- Use the scale at constant ambient temperatures and avoid using in draughts, otherwise the
measurement results could be falsified.
- After Storage under extreme conditions at least 30 min required until the scale has acclimated
and is ready for intended use.
- If possible, place the scale away from other devices or sources that generate electromagnetic
or other disturbances as these can falsify the measurement results.
- Use only approved accessories and peripherals. The use of unauthorised accessories or cables
will invalidate the classification of the scale as a medical device.
- Before cleaning the device, disconnect the mains adapter from the mains.
- Do not immerse the device in water or other liquids.
- If the scale will not be used for a long time, it should be cleaned and stored in a protective film.
The addition of a drying agent is desirable.
- Remove the batteries if you are not going to use the scale for a long time.
- If you have any problems with this device, such as setting up, maintaining or using, please
contact authorised customer support. Do not open or repair the device by yourself.
- Please report authorised customer support if any unexpected operation or events occur.
DO NOT use the scale:
- If the mains adapter is damaged;
- If the mains adapter is not working;
- If the battery compartment has an unnatural bulge;
- After long storage in a humid environment.
In such cases, please contact authorised customer support.
To Next Page
Loading...
Need help?
General
