ADE M320600-01 Instruction Manual

M320600-01+02-210429-Rev004-UM-en Page 29 of 120
How it works
The mechanical forces acting on the scales are transformed into measurable and evaluable
electrical signals by load cells. The weighing result is displayed continuously.
7. Using the scale
7.1 Starting the scale
7.1.1 Per key
To switch on the scale, briefly press the ON/OFF key.
After a brief functional test, the scale will show "0.00 kg" and the symbol >0<.
The scale is now ready for use.
The scale will start automatically with the last function used. When used for the first time, the scale
will start automatically with the hold function.
7.1.2 Tap to start
Briefly load the weighing surface of the scale by briefly "tapping" it with your foot. If done correctly,
a short functional test will follow, at the end of which the scale will show "0.00 kg" and the symbol
>0<. The scale is ready for use.
7.2 Switching off the scale
7.2.1 Automatic switch off
The scale will switch off automatically after 90 seconds in battery mode and after 7 minutes in
mains operation.
Weighing
surface
Mains
connection
Battery
compartment
Support feet
Column support
with plug
connection
Short column (100 mm)
Long column
(850 mm)
Holes for length
measuring rod
M12 cheese head screw
M6 cheese head screw
Indicator back
Mains connection
Indicator
front
Cable with band
at both ends
Mounting plate
for indicator

ADE M320600-01 Specifications

General

Brand	ADE
Model	M320600-01
Category	Scales
Language	English