ADE td 1600 - Using the Alarm Function; Setting the Alarm Time; Stopping the Alarm

35
TD 1600 / 1601
English
Using the alarm function
Setting the alarm time
1. Press on MODE as often as needed until an
alarm symbol
and “0:00” are shown on the
display.
2. Press and hold the START/STOP key until the
display indicator starts to blink and a bell
symbol
is shown.
3. Set the desired alarm hour using the MIN key.
4. Set the desired alarm minute using the SEC key.
5. Finally press START/STOP. The alarm time has
been set.
6. Press MODE as often as necessary until the
current time is displayed again.
In order to deactivate the alarm
function before the set alarm time
is reached, press the MIN and SEC
keys simultaneously. The bell symbol
disappears.
Stopping the alarm
At the set alarm time, you will be woken by
beeping:
Translation Timer 1600_01 Ordner.indb 35 25.02.2016 09:14:31