51
Weather Station with Wireless Outdoor Sensor WS 2136-x
English
Temporary shutos of the transmitter can sometimes
happen, e.g. because of maintenance work.
Setting up the base station
− Set up the base station as close to a window as
possible. Here, the reception will generally be best.
Setting up the outdoor sensor
DANGER of severe injuries
− During wall installation, there must be no
electrical cables, gas or water pipes installed
in the walls at the mounting site. Otherwise,
when drilling holes, there is a risk of electric
shock!
The outdoor sensor has a hanging loop on the back.
− Place or hang the outdoor sensor at a position where
it is protected from the direct inuence of the weather
(rain, sun, wind, etc.). Suitable locations are, for
example, under an awning or in a carport.
To Next Page
Loading...
Need help?
General
