74
Weather station with wireless outdoor sensor WS 2301
Repeat alarm (SNOOZE function)
− Press once when the alarm signal sounds.
The alarm signal stops according to the setting
made (default setting: 5 minutes). The correspond-
ing alarm symbol and flash on the display.
After the set time has elapsed, the device turns on
to wake you up again. This procedure can be re-
peated multiple times.
− To exit snooze mode, briefly press any button (except
) or press and hold for more than
2 seconds.
Other functions
Illuminating the display
− Pressing turns on the display backlight for
about 8 seconds.
Changing the batteries
The battery symbol indicates that the inserted
batteries should be replaced.
When the battery symbol is displayed under
,
replace the batteries in the base station.
When the battery symbol is displayed under the
number of the outdoor sensor, replace the batter
-
ies in the outdoor sensor. Note the number of the
displayed channel (only when using several outdoor
sensors).
To Next Page
Loading...
