Adec 6300 - Install the Ceiling Mounting Plate; Position and Mark Mounting Plate

A-dec 6300 Ceiling-Mount Dental Light Installation Guide
4 85.0521.00 Rev R
Install the Ceiling Mounting Plate
1. Position the mounting template on the
ceiling. Mark the mounting holes, power
stub, and data line.
2. Make sure the electrical power conduit
reaches the access holes in the top of the
mounting plate. See Figure 5.
3. Position the mounting template
(included in the kit) on the ceiling and
mark the five holes for the mounting
screws, power cable, and data line.
Figure 4. Mounting Plate Orientations
NOTE When securing the
mounting plate and post,
position the collar bolt holes in
relation to the chair’s position as
shown in Figure 4. Be sure to
position the threaded hole for
the collar bolt next to the
junction box.
Junction
Box
Power
Stub
Junction
Box
Power
Stub
Left-Hand Operator OrientationRight-Hand Operator Orientation
The slot in the top of the
collar faces the chair.
Figure 5. Install the Ceiling Mounting Plate
Power Supply Access
Junction Box