Need help?Do you have a question about the ADEMCO 4140XM and is the answer not in the manual?
General| Type | Control Unit |
|---|---|
| Input Voltage | 16.5 VAC |
| Output Voltage | 12 VDC |
| Compatibility | ADEMCO peripherals |
| Communication | Telephone line |
| Partitions | 1 |
| Battery Backup | Yes |
Microprocessor-based systems with EEROM memory, supporting wired/wireless zones.
Programming via office, job site, or remote download using specific software.
Records zones in alarm and maintains a 10-day history for system review.
Accesses built-in manual functions and displays zone descriptors via console.
Detailed descriptions of 10 zone types and their system responses to faults.
Details for Zone 1, Zones 2-8, and Zone 9, including EOLR supervision.
Description of the 4171XT-XM/4152LMB for expanding zones via polling loop.
Wiring, length limits, and interference considerations for 2-wire polling loop expansion.
Information on polling loop current limits and the use of loop extenders.
Requirements for wireless expansion using 4280 RF Receivers and zone designation.
Details on 4137 and 5137 remote console power and current draw.
Covers 2-wire, 4-wire, polling loop, and wireless smoke detector setups.
Details on polling loop PIRs (4196, 4275) and wireless PIR (5775).
Explanation of terminals on the phone line interface board for connection.
How to connect external sounders for 4140XM and 4130XM/5130XM systems.
Step-by-step instructions for surface and flush mounting of consoles.
Primary/backup power, battery standby, and power-up procedures.
Programming installer, master, and user codes, plus Quick Arm feature.
Procedures for recalling and displaying system event history.
Overview of keypad operations for system control and status viewing.
Details various reporting formats like Low Speed, 4+2 Express, and High Speed.
Information on Contact ID reporting compatibility with Ademco 685 receivers.
How to load pre-programmed default communication sets.
Accessing and modifying specific programming fields via keypad.
Step-by-step guide for testing system functions after installation.
Instructions for training the end-user on system operation and features.
Physical and electrical specs for 4140XM and 5130XM/4130XM control units.
Physical and electrical specs for 5137/4137 remote consoles.
Notes on FCC compliance, installation, and unauthorized modifications.
Discusses system limitations regarding protection, power, signal blockage, and detector performance.
To Next Page
