Need help?Do you have a question about the ADEMCO Vista 4140XM and is the answer not in the manual?
General| Zones | 8 |
|---|---|
| Partitions | 1 |
| Keypad Compatibility | Ademco Keypads |
| Communication Formats | Ademco Contact ID |
| Outputs | 1 programmable output |
| Power Input | 16.5VAC |
| Battery Backup | 12V |
| Dimensions | 12.5" |
Describes the VISTA XM Controls features and capabilities.
Explains programming methods, default values, and options.
Details the memory-of-alarm feature and system history tracking.
Explains user manual features accessible directly on consoles.
Defines types 1, 2, 3 for primary/secondary entry/exit and perimeter zones.
Defines types 4, 5, 10 for interior burglary with different delay logic.
Defines types 6, 7, 8, 9 for silent, audible, auxiliary, and fire alarms.
Details configurations for Zone 1, Zones 2-8, and Zone 9.
Explains the 4171XT-XM/4152LMB for expanding zones via polling loop.
Details power, current draw, and models (4137, 5137) for consoles.
Covers smoke detector setup for various zone types and connection methods.
Step-by-step instructions for surface mounting control panels and consoles.
Instructions for flush mounting control panels and consoles with a trim ring.
Details the DC power packs required for system operation.
Explains the function and components of the backup rechargeable battery.
Provides estimated battery standby times based on load.
Step-by-step guide for correctly powering up the alarm system.
Explains installer, master, and temporary access codes for system use.
How to view and recall system event history and alarm messages.
Describes essential functions performed using the system keypad.
Details Ademco Low Speed communication reporting formats.
Explains the standard and expanded 4+2 reporting types.
Details the faster 4+2 Express reporting format.
Explains Ademco's high-speed communication reporting formats.
Explains the Contact ID reporting format and its capabilities.
Procedure for loading pre-programmed default system settings.
Steps for entering and performing tests in system test mode.
Procedures for testing the system while it is armed.
Guide for explaining system operation and handover to the end-user.
Detailed technical specifications for the 4140XM control panel.
Detailed technical specifications for the 5130XM/4130XM control panels.
Technical specifications for the 4137/5137 remote consoles.
Important notes for installers regarding system maintenance and testing.
To Next Page
