ADEMCO Accord User Manual

CONTENTS
Full Set [1]..........................................2
Part Set [2] .........................................2
Night Set [3]........................................3
Unsetting............................................3
Unsetting after or during an alarm.......3
Testing the system [5].........................3
Isolating zones [6]...............................4
Reprogramming codes [8]...................4
Chime facility [9].................................5
Viewing the alarm Log [0] ...................5
Indicators and what they mean ...........6
System settings ..................................7
System limitations ..............................8
USER
INSTRUCTIONS

ADEMCO Accord Specifications

General

Brand	ADEMCO
Model	Accord
Category	Security System
Language	English

Summary

Full Set

Part Set

Night Set

Unsetting

Unsetting After Or During An Alarm

Stops an active alarm by entering the User Code; identifies the alarm-triggering zone.

Testing the Alarm System

Zone Isolation

Changing Codes

Chime Facility

Viewing the Log

Indications and What They Mean

Power LED

Indicates AC mains supply status: ON (normal), OFF (failure), flashing (contact provider).

Tamper LED

Illuminates if a system device is tampered with; advises contacting the Alarm Company.

Day LEDs

'On' indicates unset, 'Flashing' indicates setting, extinguishes upon successful set.

Zone LEDs

'On' indicates alarm/zone not clear, 'Flashing' indicates isolated, 'Off' is normal.

Your Alarm System Settings

Location

Limitations