EasyManua.ls Logo

ADEMCO Vista 15 - User Manual

ADEMCO Vista 15
4 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Ademco Vista 15 Quick Guide
https://alpha.adt.com/help/41.html[11/8/2018 11:51:27 PM]
Ademco Vista 15 Quick Guide
For a detailed review of the entire system, please view the Admeco Vista 15 manual.
« Help Center
Arm &
Disarm the
System
Battery Bypass
Protected
Areas
Date &
Time
Settings
Chimes &
Beeps
Reset Security
Codes
Trouble
Conditions
Volume
Arm and Disarm
Arm:
To arm all sensors in AWAY mode when you are leaving the premises, enter your [security code] +
[3].
To arm all sensors in STAY mode when you are not leaving the premises, enter your [security code]
+ [2].
To arm in MAXMIMUM mode, when no one will be in or around the premises for long periods of
time, enter your [security code] + [4].
Select
Question and Answer IconNeed help?

Do you have a question about the ADEMCO Vista 15 and is the answer not in the manual?

Summary

Arm and Disarm System

Arming the System

Instructions for arming the Ademco Vista 15 system in AWAY, STAY, and MAXIMUM modes using security codes.

Disarming the System

Instructions for disarming the Ademco Vista 15 system using a security code.

Battery Information

Battery Type and Indicators

Details the UB 1270 battery used, and indicators for AC power loss (NO AC) and low battery (BAT).

Bypass Protected Areas

Bypassing and Unbypassing Zones

Procedure to bypass zones for arming and to unbypass zones, including displaying bypassed zones.

Change Date and Time Settings

Setting System Date and Time

Step-by-step guide to changing the system's date and time using security codes and keypad entry.

Chimes and Beeps

Chime Mode Operation

Explains chime alerts for protected doors/windows and how to enable/disable chime and voice chime modes.

Resetting the System

Silencing Alarms and Clearing Memory

Procedure to silence an alarm and clear alarm event memory using security codes.

Security Codes Management

Adding and Deleting User Codes

Instructions for adding new user codes and deleting existing user codes via the master programmer code.

Trouble Conditions

Identifying and Silencing Troubles

How to identify trouble conditions (CHECK) and silence beeping, and general causes for wireless sensors.

Volume Control

Volume Adjustability

States that the volume on the Ademco Vista 15 system is not adjustable.

Summary

Arm and Disarm System

Arming the System

Instructions for arming the Ademco Vista 15 system in AWAY, STAY, and MAXIMUM modes using security codes.

Disarming the System

Instructions for disarming the Ademco Vista 15 system using a security code.

Battery Information

Battery Type and Indicators

Details the UB 1270 battery used, and indicators for AC power loss (NO AC) and low battery (BAT).

Bypass Protected Areas

Bypassing and Unbypassing Zones

Procedure to bypass zones for arming and to unbypass zones, including displaying bypassed zones.

Change Date and Time Settings

Setting System Date and Time

Step-by-step guide to changing the system's date and time using security codes and keypad entry.

Chimes and Beeps

Chime Mode Operation

Explains chime alerts for protected doors/windows and how to enable/disable chime and voice chime modes.

Resetting the System

Silencing Alarms and Clearing Memory

Procedure to silence an alarm and clear alarm event memory using security codes.

Security Codes Management

Adding and Deleting User Codes

Instructions for adding new user codes and deleting existing user codes via the master programmer code.

Trouble Conditions

Identifying and Silencing Troubles

How to identify trouble conditions (CHECK) and silence beeping, and general causes for wireless sensors.

Volume Control

Volume Adjustability

States that the volume on the Ademco Vista 15 system is not adjustable.

Overview

  1. Function Description
  2. Important Technical Specifications
  3. Usage Features
  4. Maintenance Features

The Ademco Vista 15 is a security alarm system designed for residential and commercial premises, offering a range of features for arming, disarming, and managing security. It functions as a central control unit for various sensors and can be operated via a keypad. The system is designed to provide comprehensive protection by monitoring different zones and alerting users to potential security breaches or system issues.

Function Description:

The primary function of the Ademco Vista 15 is to secure a property by monitoring designated zones for intrusions or other specified events. When armed, the system will trigger an alarm if a protected zone is violated. It supports different arming modes to suit various scenarios, such as when occupants are leaving the premises (AWAY mode), staying inside (STAY mode), or when the property will be vacant for extended periods (MAXIMUM mode). The system also allows for the bypassing of specific zones, enabling users to arm the system while intentionally leaving certain areas unarmed or accessible.

Beyond intrusion detection, the Ademco Vista 15 includes features for managing user access through security codes, providing a hierarchical structure for system control. It also offers chime and voice chime modes to audibly indicate when protected doors or windows are opened, even when the system is not fully armed. The system provides visual and audible indicators for various system statuses, including trouble conditions, low battery, and loss of AC power.

Important Technical Specifications:

While specific technical specifications like processor type or memory capacity are not detailed in the provided quick guide, several operational aspects are highlighted:

  • Battery Type: The system operates on a UB 1270 battery for backup power.
  • User Capacity: The system supports up to 16 additional users, in addition to the Master user or Partition Programmer.
  • Wireless Sensor Compatibility: The system can include wireless sensors, as indicated by the troubleshooting section mentioning CHECK conditions caused by environmental changes affecting wireless sensors.
  • Volume: The volume on the Ademco Vista 15 is not adjustable.

Usage Features:

The Ademco Vista 15 offers several user-friendly features for daily operation:

  • Arming Modes:
    • AWAY Mode: To arm all sensors when leaving, enter [security code] + [3].
    • STAY Mode: To arm all sensors when staying on the premises, enter [security code] + [2].
    • MAXIMUM Mode: To arm when no one will be in or around the premises for long periods, enter [security code] + [4].
  • Disarming: To disarm the system, enter [security code] + [1].
  • Bypassing Zones: To bypass a specific zone, enter [security code] + [6] + [zone number]. After bypassing, arm the system as usual. To display all bypassed zones, press [6]. To unbypass a zone, disarm the system.
  • Chime Mode:
    • To turn chime mode on/off, enter [security code] + [9]. When on, three tones sound when a protected door/window is opened.
    • To turn voice chime mode on/off, press [#] + [0] + [2] + [4]. Voice chime can only be activated when chime mode is on.
  • Resetting Alarms: To silence an alarm and clear its memory, enter [security code] + [1] twice.
  • Managing Security Codes:
    • Add User: Enter [Master/Partition Programmer code] + [8] + [user #] + [new user's code].
    • Delete User: Enter [Master/Part. Prog code] + [8] + [user number ] + [#] + [0].
  • Changing Date and Time: Enter [security code] + [#] + [6] + [3]. Then, follow the prompts:
    • Use [*] to move the cursor forward and [#] to move back.
    • Enter 2-digit hour and minute (e.g., [06] and [17] for 6:17).
    • Press [1] for PM or [0] for AM.
    • Enter 4-digit year, month, and day (e.g., [2015], [08], and [23] for August 23, 2015).
    • To exit, press [*] when the cursor is on the last digit.

Maintenance Features:

The Ademco Vista 15 provides indicators and procedures for addressing common maintenance needs:

  • Battery Monitoring:
    • NO AC indicates loss of AC power and use of backup battery.
    • BAT indicates a low battery condition.
    • Instructions for battery replacement are available on a dedicated Battery Replacement Page. The system uses a UB 1270 battery.
  • Trouble Conditions:
    • Indicated by the word CHECK and continual beeping from the touchpad.
    • CHECK + zone no. indicates a problem in a specific zone.
    • To silence trouble beeps, press any key or enter [security code] + [OFF].
    • For a complete list of trouble conditions and troubleshooting, users are directed to the Safewatch and Ademco Systems Troubleshooting page. This suggests that the system provides diagnostic information to help users identify and resolve issues, potentially including problems with wireless sensors due to environmental changes.

Overall, the Ademco Vista 15 is a robust security system with clear operational procedures and indicators to help users manage their property's security effectively and address maintenance requirements.

ADEMCO Vista 15 Specifications

General IconGeneral
BrandADEMCO
ModelVista 15
CategoryControl Panel
LanguageEnglish

Related product manuals