ADEMCO Vista-20 Quick Guide

Ademco Vista 20 Quick Guide
https://alpha.adt.com/help/156[11/13/2018 7:41:51 PM]
Ademco Vista 20 - Quick Guide
For a detailed review of the entire system, please view the Ademco Vista 20 manual.
« Help Center
Arm &
Disarm the
System
Battery Bypass
Protected
Areas
Chimes &
Beeps
Reset Security
Codes
Trouble
Conditions
Volume
Arm and Disarm
Arm:
To arm all sensors in AWAY mode when you are leaving the premises, enter your [security code] +
[AWAY].
To arm in STAY mode when you are not leaving the premises, enter your [security code] + [STAY].
Disarm:
To disarm, enter your [security code] + [OFF].
Select

ADEMCO Vista-20 Specifications

General

Partitions	2 partitions
User Codes	48 user codes (including 1 master code and 1 installer code)
Keypads Supported	Up to 8
Wired Zones	9
Battery Backup	12VDC, 7Ah (typically)
Wireless Expansion	Supports 5881/5882 wireless receiver
Compatibility	Honeywell Home / Resideo Total Connect
Zones	9 zones (expandable up to 48 zones with 4208 and 4219 zone expanders)