Need help?Do you have a question about the ADEMCO VISTA-20SE and is the answer not in the manual?
General| Partitions | 2 |
|---|---|
| Keypads Supported | Up to 8 |
| Type | Burglar Alarm System |
| User Codes | 48 |
| Wireless Expansion | Yes |
| Outputs | 2 programmable outputs, built-in siren driver |
| Dimensions | 12.5" H x 12" W x 4.5" D |
| Operating Temperature | 32°F to 120°F (0°C to 49°C) |
Introduction to the security system's capabilities.
Explains system architecture and zone assignments.
Details burglary protection modes, security codes, and fire protection.
Describes alarm events, memory, phone access, and paging.
Overview of different keypad models and their displays.
Explains the purpose of each key for system operation.
Describes status lights, sounder functions, and indicators.
How to check for open zones using the READY key.
Guide to arming only perimeter zones.
Guide to arming all zones for maximum security.
Procedure to disarm the system and silence alerts.
How to temporarily disable zones from triggering alarms.
How to enable audible alerts for door/window openings.
Using panic keys for silent or audible alarms.
Activating or deactivating system-controlled devices.
Explains security codes for different users (master, babysitter, duress).
Procedures for adding, changing, and deleting user codes.
How to test the system's functionality.
Identifies and explains system trouble indicators.
Guidance on general care and battery management.
How the system responds to fire emergencies.
NFPA recommendations for smoke detector installation.
Recommendations for fire escape plans.
Table of sounds, causes, and displays.
Regulatory information for US and Canada.
Critical safety information about system capabilities.
Form for homeowners insurance discounts.
To Next Page
