Need help?Do you have a question about the ADEMCO Vista 4140XMP and is the answer not in the manual?
General| Brand | ADEMCO |
|---|---|
| Model | Vista 4140XMP |
| Category | Security System |
| Language | English |
Overview of the VISTA 4140XMP control unit and its features.
Describes the methods and convenience of programming the system.
Details new features and improvements in the 4140XMP model.
Explains the different zone types and their system responses.
Details wiring and configuration for zones 1-9.
Covers 4280/4280-8 receiver installation and programming.
Explains transmitter supervision, low battery, and zone status.
Covers house ID, transmitter ID, sniffer mode, and test mode.
Describes 4127, 4137, and 5137 consoles, including wiring.
Details relay output, UL installations, and compatible sounders.
Covers compatible smoke, PIR motion, and glass break detectors.
Step-by-step instructions for physically mounting the 4140XMP panel and lock.
Details surface and flush mounting for various consoles.
Information on the transformer, battery, and standby current draw.
Proper earth ground connections and system power-up sequence.
Explains installer, master, temporary, and duress codes.
Covers keypad operations, message viewing, and user guide access.
Identifies and explains "CHECK" messages and AC power loss.
Explains "COMM. FAILURE", "LO BAT", and "SET UP ERROR" messages.
Procedure for setting the system's real-time clock.
Describes Split/Dual, Low Speed, 4+2, and Contact ID formats.
Details Ademco High Speed format and its limitations.
Outlines accessing programming mode and data entry.
Step-by-step guide for entering programming mode and setting defaults.
Explains loading and function of Low Speed and Ademco Express defaults.
Explains loading and function of High Speed and Contact ID defaults.
Guide for programming custom zone names and locations.
Procedure for creating and adding custom words to vocabulary.
Explains downloading, necessary software, hardware, and connection.
Details security measures and functions available via downloading.
Covers using test mode, armed system tests, and user handover.
Addresses common problems with consoles, RPMs, and hard-wired zones.
Covers wireless device issues and communication failures.
Provides physical and electrical specifications for the control.
Details the operation and wiring diagram for the 4190WH module.
FCC statement on radio frequency energy and interference correction.
Instructions for handling telephone line issues and service.
Canadian DOC statement on certified equipment and installation.
Important warnings about system limitations and potential failures.
Details the warranty period, coverage, and limitations.
To Next Page
