Need help?Do you have a question about the ADEMCO VISTA-15P Series and is the answer not in the manual?
General| Brand | ADEMCO |
|---|---|
| Model | VISTA-15P Series |
| Category | Security System |
| Language | English |
Provides an overview of the ADEMCO security system's features and benefits.
Details core system functions including burglary and fire protection, and security codes.
Describes keypad features like LCD display, sounder, backlighting, and voice capabilities.
Explains the functionality of fixed-word display keypads and their indicators.
Details the primary and secondary functions of various keys on the keypad.
Explains the function of entry delays for disarming the system upon re-entry.
Describes the exit delay period for leaving the premises after arming the system.
Details conditions that trigger an exit alarm and how to clear it.
Instructions for using the [*] key to check system status and open zones.
Covers commands for arming the system in various modes like STAY, AWAY, MAXIMUM.
Enables arming the system without a security code via the [#] key.
Describes arming the system using programmed function keys.
Explains arming the system using a single programmed function key.
Details arming the system in stages using a single key press.
Instructions for arming and disarming the system using a keyswitch.
Explains how to disarm the system and silence alarms using the OFF key.
Procedure for bypassing individual protection zones for arming.
Allows easy bypassing of all open (faulted) zones without manual entry.
Details how to activate chime mode for door/window openings while disarmed.
Explains the voice chime feature for announcing zone status and openings.
How to view the system's current date and time settings.
Step-by-step guide to adjusting the system's date and time.
Details how to activate emergency functions (silent, audible, fire alarms) via keys.
Introduction to macro keys for automating sequences of commands.
Illustrates programming a macro sequence with a practical example.
Procedure for activating a system function via a programmed macro key.
Explains how to control system devices like lights using specific commands.
Details automatic system event message transmission to pagers.
Instructions for manually sending messages to pagers.
Describes latch key paging for tracking user arrival times.
Overview of master codes, user codes, and their assignments.
Defines user authority levels and the functions they can perform.
Procedure for adding and configuring user codes and their attributes.
Explains how keypads display partition information and access control.
Procedure for using the GoTo command to access other partitions.
Details the ability to arm multiple partitions simultaneously.
Describes the operation of a common zone shared by multiple partitions.
Overview of end-user schedules for controlling system events.
Step-by-step guide to programming automated schedules for system events.
Explains the system's history log for recording events.
Procedure for accessing and navigating the system's event log.
Provides definitions for event codes displayed in the log.
Guidelines for weekly system testing to ensure proper operation.
Explains system trouble indicators like CHECK and BAT.
Details other trouble conditions and their meanings (e.g., COMM. FAILURE, LO BAT).
Describes system behavior and actions during a total power failure.
Guidance on troubleshooting telephone line issues with the system.
Basic maintenance recommendations for system components.
How to silence low battery warning tones at the keypad.
Guidance on replacing batteries in wireless sensors and detectors.
Recommendations for routine cleaning and care of system components.
Describes how the fire alarm system operates and sounds alerts.
Procedure for silencing fire alarms and clearing the display.
Instructions for resetting smoke detectors after a fire alarm.
How to manually trigger a fire alarm using panic keys.
Details which panic keys are assigned for fire emergency functions.
National Fire Protection Association guidelines for smoke detector placement.
Provides recommendations for fire emergency evacuation planning.
FCC and Industry Canada statements regarding RF emissions compliance.
FCC Part 68 and Industry Canada compliance for telephone connections.
Log for tracking system users, their attributes, and programming.
Configuration log for pager phone numbers and automatic reports.
Details the limited warranty terms and conditions for ADEMCO products.
To Next Page