Need help?Do you have a question about the ADEMCO VISTA-128FB and is the answer not in the manual?
General| Zones | 128 |
|---|---|
| Partitions | 8 |
| User Codes | 150 |
| Power Supply | 16.5VAC, 40VA transformer |
| Users | 150 |
| Event Log Capacity | 512 |
| Communication | Phone line, IP |
| Backup Battery | 12VDC, 7AH |
| Operating Temperature | 0°C to 49°C (32°F to 120°F) |
| Outputs | 2 on-board, expandable |
Introduction to the Ademco Partitioned Security System, its purpose and components.
Explains sharing a single physical alarm system among different users and partitions.
Details zones, fire protection, and burglary protection modes (STAY, AWAY, INSTANT, MAXIMUM).
Covers alarms, memory of alarm, speed keys, schedules, device timers, GOTO command, master keypads, and phone access.
General information about keypads, LCD displays, sounders, and the Alpha Keypad.
Details functions of keys like OFF, AWAY, STAY, MAXIMUM, BYPASS, CHIME, READY, #, and indicators.
Explanation of exit delay for leaving and entry delay for disarming the system.
Covers STAY (perimeter only, delay on) and INSTANT (perimeter only, delay off) modes.
Details AWAY (all zones, delay on) and MAXIMUM (all zones, delay off) arming modes.
Procedure for disarming the system, silencing alarms, and handling memory of alarms.
Instructions on using the BYPASS key and quick bypass feature to exclude zones.
Defines security codes, authority levels, and their impact on system functions.
Procedures for adding, changing, and deleting user codes and authority.
How to use the GOTO command to switch between system partitions.
How to display and interpret system event logs and categories.
Using the READY key to check for open zones and display zone descriptors.
Activating CHIME mode for alerts on door/window openings while disarmed.
How to manually activate silent, audible, personal, or fire panic alarms.
Programming and executing command sequences using Speed Keys (A, B, C, D).
Commands for unlocking access doors momentarily or for a specific period.
Using #70 command to turn lights or devices on/off via keypad or phone.
Delaying closing times and programming temporary schedules for automatic functions.
Setting ON/OFF times and days for controlling various devices.
How to use the TEST key and conduct weekly system tests for proper operation.
Recommendations for system care, replacing wireless sensor batteries, and routine cleaning.
How the fire alarm system operates, including sounding alarms and silencing them.
Instructions for conducting a fire drill test using Code + # + 69.
Steps recommended by NFPA for establishing and practicing fire escape plans.
Interpreting 'CHECK' or 'TRBL' messages, zone issues, and system troubles.
Actions to take for power indicator issues, AC LOSS, and battery operation.
Summary of sounds, causes, and keypad displays for system notifications.
FCC Part 15 and Part 68 notices regarding radio frequency energy and telephone connections.
Canadian Department of Communications (DOC) certification and notice for equipment.
Information on alarm system limitations, warnings, and the Ademco one-year limited warranty.
To Next Page
