Need help?Do you have a question about the ADEMCO VISTA-128B and is the answer not in the manual?
General| Partitions | 8 |
|---|---|
| Event Log | 512 events |
| Power Supply | 16.5VAC, 40VA transformer |
| Power Requirements | 16.5 VAC, 40 VA |
| Alarm Zones | 128 |
| Keypads Supported | Up to 16 |
| Communication Formats | Ademco Contact ID, SIA, 4+2 |
| Battery Backup | 12V, 7Ah rechargeable battery |
| Operating Temperature | 32°F to 120°F (0°C to 49°C) |
| Dimensions | 14.5" W |
| Outputs | 2 on-board, expandable |
General introduction to the Ademco security system, its components, and capabilities.
Explains how the system shares physical components among different users and partitions.
Details zones, fire protection, and the four modes of burglary protection.
Covers alarms, alarm memory, speed keys, schedules, timers, and partition access.
Overview of keypad features like LCD display, sounder, and different keypad types.
Detailed explanation of each key's function (OFF, AWAY, STAY, MAXIMUM, etc.).
Explains how to manually activate silent and audible emergency alarms using key combinations.
Introduces security codes, user numbers, and authority levels for system access.
Procedures for adding, changing, and deleting user codes and authority levels.
Explains STAY and INSTANT modes for arming perimeter protection.
Details AWAY and MAXIMUM modes for arming all zones.
Describes disarming the system, silencing alarms, and managing alarm memory.
Instructions on performing weekly system tests to check protection points.
Guidance on replacing batteries in wireless sensors and identifying low battery conditions.
Explains common trouble conditions and their display messages on the keypad.
Actions for power failure and general system limitations and warnings.
To Next Page
