Need help?Do you have a question about the ADEMCO Vista-10 and is the answer not in the manual?
General| Keypads | Up to 8 |
|---|---|
| Power Supply | 16.5VAC, 25VA Transformer |
| Outputs | 2 programmable outputs |
| Partitions | 1 |
| Communication | Cellular |
| Battery Backup | 12VDC, 4AH |
| Type | Wired Security System |
Details arming modes (STAY, AWAY, INSTANT, MAXIMUM) and CHIME mode.
Explains the 24-hour fire protection and directs to the FIRE ALARM SYSTEM section.
Describes what happens when an alarm occurs and how to stop it.
Explains how the OFF key disarms the system, silences alarms, and clears displays.
Describes arming the entire system (interior and perimeter).
Describes arming the perimeter only, allowing movement inside.
Explains arming the entire system without an entry delay.
Explains testing the system and alarm sounder.
Explains removing individual zones from monitoring.
Describes arming perimeter without entry delay.
Discusses individual keys for emergency functions.
Explains the Master code and temporary user codes for system functions.
Describes a code used under threat to silently notify the central station.
Explains using the '#' key for quick arming without a code.
Provides step-by-step instructions for managing user codes.
Explains preset exit and entry delays for arming/disarming.
Explains how to check for open zones before arming.
Explains how to bypass specific zones before arming.
Explains bypassing all open zones without entering numbers individually.
Explains how to arm the perimeter while allowing entry/exit through a specific door.
Explains arming perimeter without entry delay, for when no one is expected to enter.
Explains arming all zones (interior and perimeter) with exit/entry delay.
Explains arming all zones without entry delay, for vacant premises.
Explains how to disarm the system using the OFF key.
Details silencing burglary alarms and clearing memory.
Explains silencing fire alarms and clearing memory.
Explains how to manually activate emergency functions using keys.
Explains the meaning of "CHECK" and "BATTERY" displays and how to clear them.
Describes what happens during a power failure and how to diagnose.
Provides steps to take in case of a fire alarm.
Details how to silence fire alarms and clear the console display.
Provides steps for planning and practicing an escape plan in case of fire.
How to arm the system in various modes.
How to bypass specific zones.
How to silence burglary and fire alarms.
How to disarm the system.
To Next Page
