To Next PageTo Next Page
Need help?Do you have a question about the ADEMCO Vista-128BP and is the answer not in the manual?
General| Product Type | Security System |
|---|---|
| Maximum Zones | 128 |
| Partitions | 8 |
| Keypads Supported | Up to 16 |
| Operating Temperature | 32°F to 120°F (0°C to 49°C) |
| Users | 150 users |
| Communication Formats | ADEMCO Contact ID |
| Battery Backup | 12V, 7Ah |
| Dimensions | 14.5" x 12.5" x 3.5" |
| Power Requirements | 16.5VAC, 40VA |
Details the steps for programming partition-specific fields for a multi-partition system.
Lists the commands used within the #93 Menu Mode for programming various system functions.
Guide to programming zones using the #93 Menu Mode, including zone number entry and summary display.
Steps to enter Expert Mode for zone programming, highlighting its limitations compared to standard zone programming.
Procedures for enrolling wireless keys and their associated templates and zone assignments.
Table detailing default programming templates for 5804 and 5804BD wireless keys.
Overview of report code categories and their associated alarm/system codes used in programming.
Instructions for programming restore and supervisory codes for zones within specific groups.
Details for programming report codes for System Group #1, including closing and opening reports.
Instructions for programming report codes for System Group #2, including Arm-STAY and event log related codes.
Details for programming report codes for System Group #3, covering early/late open/close and schedule change reports.
Programming report codes for System Group #4, specifically walk-test start and end reports.
Guide on how to program user-friendly English descriptions for zones and other system elements.
Step-by-step guide for selecting and assigning descriptive words to specific zones.
Instructions for customizing the keypad display message when the system is in a disarmed state.
Procedure for adding up to 60 installer-defined words to the system's vocabulary.
Guide to programming 4-character descriptors for each system partition.
Details on how to program addressable devices like keypads, RF receivers, and relay modules.
Configuration settings for the RF expander, including House ID, required for wireless keypads.
Programming options for relay modules, specifically for the 4204CF model and supervised operation.
Keypad functions for programming the 7820 Radio, detailing normal and SHIFT key operations.
Instructions for programming the panel ID for a panel linking module, including supervision options.
Explanation of available actions for outputs and the conditions that trigger them, such as events or zone types.
Details on how to program the conditions that de-activate an output, including zone lists and system operations.
Settings for configuring relays, including group, restriction, type, zone number, and ECP address.
Procedures for creating and managing zone lists used to control output device activation and deactivation.
Steps to program voice descriptors for outputs using the VIP Module and a vocabulary list.
Guide to creating custom word substitutes for VIP Module annunciation, replacing default vocabulary.
Configuration of scheduled check-in intervals, days, months, and times for automatic downloader communication.
Worksheet for defining partitions, descriptors, and key assignments for the security system.
Worksheet for logging details of addressable devices, including type, address, and console options.
Worksheet for defining user access codes, authority levels, and partition permissions for partitions 1 & 2.
Worksheet for defining user access codes and partition permissions for partitions 3 and 4.
Lists the commands used within the Scheduling Menu for programming time windows, schedules, and events.
Lists the events that cause the system to automatically update Time-Driven Event statuses.
Action specifiers for programming relay commands, including ON/OFF, close duration, and group operations.
Action specifiers for programming arming and disarming functions, including activation times and partition selections.
Worksheet for defining up to 8 access schedules for system access control based on time windows.
Procedure for programming temporary schedules for each partition, including disarm and arm windows.
