ADENDORFF MCJ1000 - Save This Manual; Safety Warnings and Precautions; General Safety Precautions; Do Not Force Tool

Specifications
ITEM
DESCRIPTION
Motor
1/2 Horsepower;
Input Voltage
220-240VAC, single phase,
Or 100-120V/AC, single phase,
Spindle Rotation Speed
50Hz: 850 to 2510 RPM;
60Hz: 1020 to 3000 RPM
Max. Stock Diameter
14 inches
Max. Stock Length
40 inches
Swing Over Bed
14 inches
Distance Between Centers
40 inches
Head Stock Thread
1"x8 T.P.I. or 3/4”x16 T.P.I. or other
Dimensions
56-1/2 x 8 x13-1/2 inches
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be
followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1. Do not force tool. It will do the job better and more safely at the rate for which it was
intended. Do not use inappropriate attachments in an attempt to exceed the tool’s
capacities.
2. Use the right tool for the right job. Do not attempt to force a small tool or
attachment to do the work of a larger industrial tool. Do not use a tool for a purpose
for which it was not intended.
3. Avoid working alone. If an accident happens, an assistant can bring help.
4. Avoid electrical shock. Prevent body contact with grounded surfaces such as pipes,
radiators, ranges, and cabinet enclosures when connecting power.
5. Keep work area clean. Cluttered areas invite injuries.
6. Avoid damaging tool. Use only as specified in this manual.