Figure (E)
Press three times. The symbol will appear on the display. Press button to measure the
distance to the top of the object, bottom of the object, distance of two hypotenuse, and the height of
object. The results will be seen on the display. Refer to Figure (E).
Triangle Area Measurement
Figure (F)
As shown in Figure (F), press four times. The symbol will appear in the function area. Press
button to measure the three sloping sides respectively. The area of triangle will be displayed in the
result bar.
Bluetooth
Flag 3 laser distance meter’s Bluetooth function is used for interactions with Android and iOS devices on
their corresponding App. It can be used for data transfer, remote control, and more. The following
information is a guide to how to enable the Bluetooth function. For more information and details on the
function and operating steps, please refer the Android or iOS App.
Users can go to Bluetooth functions by the following two methods:
(1) Shortcut
Long press until the Bluetooth icon flickers on the status bar. This means Bluetooth is enabled and
waiting for connection.
(2) Menu
Press . Use the arrow keys to navigate and select Bluetooth. Then press .
Press or to switch the Bluetooth function on and off. Press to save the setting, or
To Next Page
Loading...
Need help?
General