aditec MKA 500 - User Manual

User Manual
MKA 500 / MKA 800
Programmable Controller for
Cooking, Universal, Baking and Boiler System
as well as Autoclaves
Version V00.13
Issue 21.02.2023_01
Measurement and
Control technology
Hardware development
Software development
Specialised electronics
Food technology
Process visualisation
aditec gmbh
Talweg 17
D-74254 Offenau
Tel.:+49(0)7136 96122-0
Fax:+49(0)7136 96122-20
www.aditec.net
eMail: info@aditec.net

Summary

2 Operating Controls

2.1 MKA 500 Controls

Detailed description and labeling of the operating controls for the MKA 500 model.

2.2 MKA 800 Controls

Detailed description and labeling of the operating controls for the MKA 800 model.

2.3 MKA 500 Button Functions

Explanation of the function of each button on the MKA 500 controller.

2.3.2 MKA 800 Button Functions

Explanation of the function of each button on the MKA 800 controller.

3 Control Elements

3.1 Entering Values (Edit Box)

Instructions on how to enter numerical values using edit boxes and arrow buttons.

4 Nominal Value Relevance

4.3 Nominal Temperature

Defines nominal value for chamber temperature control and its regulation.

4.4 Nominal Core Temperature

Explains shut-down conditions related to nominal core temperature.

4.6.1 Delta-T Process

Describes Delta-T process for gentle heating, maintaining temp difference.

4.6.2 FC Value

Explains the FC value for pasteurisation/sterilisation and its calculation.

4.7 Shut-Down Condition

Lists conditions that terminate a program step.

6 Program Set-up

6.1 MKA 500 Program Set-up (Standby)

Steps for setting up programs on the MKA 500 in standby mode.

6.2 MKA 800 Program Set-up (Standby)

Steps for setting up programs on the MKA 800 in standby mode.

6.3.1 Start from Standby MKA 500

How to initiate program start for MKA 500 from standby.

6.3.2 Start from Standby MKA 800

How to initiate program start for MKA 800 from standby.

6.3.3 Batch Number Start MKA 500

Steps to start a program with batch number entry on MKA 500.

6.3.4 Batch Number Start MKA 800

Steps to start a program with batch number entry on MKA 800.

6.3.5 Starting Time Start MKA 500

How to start an MKA 500 program at a specific start time.

6.3.6 Starting Time Start MKA 800

How to start an MKA 800 program at a specific start time.

6.4.1 MKA 500 Programming Mode

Guide to using programming mode on the MKA 500.

6.4.1.1 Program - Step Selection

How to select programs and steps within programming mode.

6.4.1.2 Program Entry

Steps for entering program names and selecting processes.

6.4.1.3 Changing Nominal Values

How to modify nominal values for a specific step.

6.4.2 MKA 800 Programming Mode

Guide to using programming mode on the MKA 800.

6.4.2.1 Program - Step Selection

How to select programs and steps within programming mode.

6.4.2.2 Program Entry

6.4.2.3 Changing Nominal Values

How to modify nominal values for a specific step.

6.6 Copying, Deleting, Inserting Programs;Steps

1 Copying a Program

2 Deleting a Program

1 Copying a Step

2 Deleting a Step

3 Inserting a Step

7 Operating Mode - Displays and Settings

8 Profile Settings

8.1 Setting Date and Time

8.4 Enabling Signal Relay

8.5 Enabling Batch Number

8.6 Data Logger

8.6.1 Copying Data to USB Stick

Instructions for copying data logger files to a USB stick.

8.9 Sensor Information

9 Power Failure

10 List of Errors (Possible Problems)

11 Connecting Controller to PC

11.1 Connection Cables

14 Additional Boards; Interface Options

16 Safety Instructions

aditec MKA 500 Specifications