ADJ Mega Bar 50 RGB RC

To Next Page

User Instructions

Mega Bar 50RGB RC Introduction

©American DJ® - www.americandj.com - Mega Bar 50RGB RC Instruction Manual Page 2

Rev. 6/11

Unpacking: Thank you for purchasing the Mega Bar 50RGB RC by

American DJ®. Every Mega Bar 50RGB RC has been thoroughly tested

and has been shipped in perfect operating condition. Carefully check

the shipping carton for damage that may have occurred during ship-

ping. If the carton appears to be damaged, carefully inspect your x-

ture for any damage and be sure all accessories necessary to operate

the unit has arrived intact. In the case damage has been found or parts

are missing, please contact our toll free customer support number for

further instructions. Do not return this unit to your dealer without rst

contacting customer support.

Introduction: The Mega Bar 50RGB RC is part of American DJ’s con-

tinuing pursuit for creating high quality affordable intelligent fixtures.

The Mega Bar 50RGB RC is a DMX intelligent LED color wash. This

wash can be used in a stand alone mode or connected in a Master/

Slave conguration. The unit can also be controlled via DMX control-

ler. This unit has seven operating modes: Manual Color mode, Color

Change mode, Color Fade mode, Auto mode, Sound Active mode,

RGB Manual Control mode and DMX control mode.

Customer Support: American DJ® provides a toll free customer sup-

port line, to provide set up help and to answer any question should you

encounter problems during your set up or initial operation. You may

also visit us on the web at www.americandj.com for any comments or

suggestions. Service Hours are Monday through Friday 8:00 a.m. to

4:30 p.m. Pacic Standard Time.

Voice: (800) 322-6337

Fax: (323) 582-2941

E-mail: support@americandj.com

To purchase parts online visit http://parts.americandj.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact

American DJ®.

PLEASE recycle the shipping carton when ever possible.

Main Page

Other manuals for ADJ Mega Bar 50 RGB RC

Manuel D'Utilisation20 pages

Need help?

Do you have a question about the ADJ Mega Bar 50 RGB RC and is the answer not in the manual?

Summary

Introduction and Initial Setup

Electrical Safety Warnings

Advises against exposing the unit to rain or moisture to prevent shock or fire.

General Information and Safety Precautions

Comprehensive Safety Precautions

Lists crucial safety measures to reduce the risk of electrical shock, fire, and damage.

Mounting and Setup Procedures

Mounting & Hanging Guidelines

Installation guidelines for safe mounting and securing the unit.

DMX Connectivity and Linking

Explains DMX protocol, linking, and data cable requirements for fixture control.

DMX Addressing and Cable Management

XLR Pin Configuration for DMX

Details XLR pin configurations for DMX data transmission and cable wiring.

Operating Modes and Control

Master-Slave Operation

How to link units for Master-Slave operation, including connections and settings.

DMX Control Mode Setup

How to select DMX channel modes and set DMX addresses for controller operation.

ADJ LED RC Remote Operation

How to activate and use the ADJ LED RC remote control for fixture functions.

LED Remote and DMX Control Details

ADJ LED RC Functionality

Detailed functions of the ADJ LED RC remote, including blackout, auto run, and program selection.

DMX Mode Selection and Addressing

Guide to selecting DMX channel modes and setting the fixture's DMX address.

DMX Mode Identification

DMX Channel Value Assignments

1-Channel DMX Mode Values

2-Channel DMX Mode Values

3-Channel DMX Mode Values

4-Channel DMX Mode Values

Advanced DMX Channel Configurations

5-Channel DMX Mode Values

6-Channel DMX Mode Values

7-Channel DMX Mode Values

Maintenance and Troubleshooting

Fuse Replacement Procedure

DMX Unit Response Troubleshooting

Common problems and solutions for units not responding to DMX signals.

Warranty and Specifications

Manufacturers Limited Warranty

Details the terms, conditions, and duration of the product's limited warranty.

Limited Warranty Period Summary

Product Specifications

Technical Specifications

Lists detailed technical specifications including voltage, LEDs, power draw, and dimensions.