10
ADOBE FRAMEMAKER 7.0
Changing Initialization Files
Online manual
• EquationDoc specifies the Equations palette.
• ThesaurusDoc specifies the Thesaurus dialog box.
• Te mplateBrowserDoc specifies the Templates browser when running with the FrameMaker product interface.
• Te mplateBrowserDocStructure specifies Template browser when running with the Structured FrameMaker
product interface.
• Ve rticalQuickAccessBar specifies the vertical QuickAccess bar.
• To olBarIniFile specifies an initialization file used to determine the layout of the QuickAccess and formatting bars
and the pop-up help text that appears when you point to a tool. You may change the tool help text but don’t change
any other settings.
Resources=fminit\fmres.dll
DialogResources=fminit\fmdlg.dll
AlternateResources=fminit\fmcustom.dll
EPSHeader=fminit\header.ps
FMFont=fminit\fm5font.ttf
FMSmallFont=fminit\fmsmall.fon
• Resources, DialogResources, and AlternateResources define dialog boxes, menus, error messages, and other
resources.
• EPSHeader specifies the PostScript header file. Do not change this setting.
• FMFont specifies the font used for symbols for anchored frames, markers, tabs, and so on. Do not change this
setting. If you move or delete this font, these symbols will be displayed incorrectly on your monitor. If you need
to reinstall the font, reinstall the FrameMaker 7.0 product application files.
• FMSmallFont contains the font used in the Tools palette. Do not change this setting.
Menu and command configuration files
Menu and command configuration files define menus and commands. The following settings in the [Files] section
define the location of these files:
ConfigCommandsFile=fmint\configui\cmds.cfg
MSWinConfigCommandsFile=fminit\configui\wincmds.cfg
ConfigMathFile=fminit\configui\mathcmds.cfg
ConfigMenuFile=fminit\maker\menus.cfg
ConfigMenuFileStructure=fminit\fmstruct\menus.cfg
ConfigCustomUIFile=fminit\configui\customui.cfg
MathCharacterFile=fminit\mathchar.cfg
• ConfigCommandsFile specifies the file that contains commands common to all platforms.
• MSWinConfigCommandsFile specifies the file that contains Windows-specific commands.
• ConfigMathFile specifies the file that contains math commands.
• ConfigMenuFile specifies the file that contains standard menus for the FrameMaker product interface.
• ConfigMenuFileStructure specifies the file that contains the standard menus for the Structured FrameMaker
product interface.
• ConfigCustomUIFile specifies the file that contains additional custom menus or changes to existing menus or
commands that you have added. The default file for this setting is customui.cfg. You can either add your menu
customizations to this file, or create your own file and put its path and filename in this setting.
To Next Page
Loading...