ADS FLASHLOGIC OEM-AL(RS)-GM8-[FLCAN]-EN User Manual

REVISION DATE
20220310
DOCUMENT NUMBER
TERMS OF USE: Automotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by
Certified Technicians who are employed by a registered business specialized in the installation of auto-
motive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle,
it is the Certified Technician’s responsibility to review the most current Product Guide, Install Guide
and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever,
including but not limited to any consequential damages, incidental damages, damages for loss of time,
loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or
may not have resulted from the use, misuse, improper installation or operation of its products. ADS
reserves itself the right to suspend any Weblink® account without notice and decline to offer technical
support to non-Certified Technicians, non-compliant Certified Technicians or end users.
BEFORE INSTALLATION
1- Connect module to computer
2- Login to Weblink account
3- Flash firmware to module (module is not preloaded with firmware)
4- Use accessories accordingly (accessories are sold separately)
Patent No. US 8,856,780 CA 2759622
INSTALL GUIDE
OEMALRSGM8FLCANEN
HARDWARE
FLCAN
ACCESSORIES
FLPROG REQUIRED
FIRMWARE
OEMALRSGM8FLCAN
www.flashlogic.comAutomotive Data Solutions Inc. © 2022
79441

ADS FLASHLOGIC OEM-AL(RS)-GM8-[FLCAN]-EN Specifications

General

Brand	ADS
Model	FLASHLOGIC OEM-AL(RS)-GM8-[FLCAN]-EN
Category	Automobile Accessories
Language	English

Summary

Install Guide

Before Installation

Steps to prepare the module before installation.

Vehicle List

Box Contents

Component Locator

Interior View

Diagram showing component locations inside the vehicle.

Driver Side View

Diagram showing component locations from the driver's side.

Passenger Side View

Diagram showing component locations from the passenger's side.

Wire Chart Type 1

Wiring Diagram Type 1

Wire Chart Type 2

Wiring Diagram Type 2

Wire Chart Type 3

Wiring Diagram Type 3

Wire Chart Type 4

Wiring Diagram Type 4

Module Programming Procedure

Valet Mode Programming Procedure

Module Navigation Procedure

Module Navigation Chart

Menus

Lists available menus for module configuration.

Options

Lists available options within configuration menus.

Settings

Details specific settings and their values.

Remote Starter Error Codes

Error Code Notes

Important notes regarding error code interpretation.

Diagnostic Codes

Table of error codes and their meanings.

Module Diagnostics

Diagnostics During Programming

LED status and diagnostics during programming.

Diagnostics During Remote Start

LED status and diagnostics during remote start operation.

Diagnostics With Ignition Off

LED status and diagnostics when ignition is off.

Module Reset Procedure

Takeover Procedure

Takeover Procedure Notes

Important notes for the takeover procedure.

Installation Checklist