ADS PS5 - User Manual

Details DC power, ground, +12V, and remote terminals, plus the 15A fuse.

Explains speaker terminals, input jacks, and the stereo/bridge switch.

Describes how to adjust input level controls for channel balancing and gain.

Overview of the extruded aluminum chassis and included hardware kit.

Emphasizes checking automotive layout before drilling or cutting.

Warns against operating the PS5 unmounted or in wet locations.

Instructs to use only the specified fuse rating to prevent damage.

Advises turning off equipment before connecting and turning on.

Recommends using quality components for optimal performance.

Discusses whether to use professional installation or DIY.

Covers planning mounting locations, wire routing, and protection.

Recommends wire gauge and protection against sharp edges.

Details critical checks before drilling for mounting screws.

Explains how to attach mounting brackets using spacers and screws.

Guides connection of 12V, ground, and remote power wires.

Explains correct speaker wire connection for proper phasing.

Covers connecting low-level pre-amp and high-level speaker outputs.

Details input connection for powerful single-channel amplification.

Explains connection of speaker wires to the PS5 terminals.

Specifies connecting one speaker system (4 Ohm min) in bridge mode.

Emphasizes fusing the +12V wire at the battery end for protection.

Guides connection of the remote wire to a switch or player output.

Discusses finding optimal chassis ground points to minimize noise.

Provides advice on selecting effective chassis ground points.

Outlines steps for safely testing the connected system.

Explains correct setting for stereo or bridged amplifier operation.

Details how to adjust input levels for optimal sound quality and gain.

Step-by-step guide for setting input levels to maximize signal-to-noise ratio.

Discusses common sources of noise and distortion in audio systems.

Explains thermal cutout and conditions that cause overheating.

Recommends keeping chassis clean and checking connections periodically.

Advises against using solvents or liquid cleaners on the PS5 chassis.

Highlights suitability for marine, aircraft, and mobile home installations.

Emphasizes the need for a DC power source that can handle high currents.

Lists the items supplied with the PS5 amplifier.

Provides physical dimensions and weight of the PS5 unit.

Instructions for completing and retaining owner's record information.