ADS Power Plate 850MX - User Manual

Advises against drilling into vehicle components and stresses secure, dry mounting.

Details +12V fusing, wire gauge, and safe connection procedures for power and signals.

Emphasizes turning off equipment before changing modules or jumpers to prevent damage.

Covers heat dissipation, ventilation, and minimum speaker impedance limits.

Details connections for ground, +12V, and remote turn-on wires, including fusing.

Provides guidance on wire gauge, polarity, and preparing speaker wire for connection.

Outlines steps for replacing modules, setting jumpers, and bridging channels.

Guides on safely testing the system by checking wiring and adjusting volume controls.

Explains how to set high pass and low pass crossover frequencies using modules.

Provides a table of switch settings for various high pass crossover frequencies.

Details how to set the continuously variable low pass crossover frequency.

Guides on setting signal source and amplifier input level controls for optimal volume.

Explains how to set level controls to achieve maximum volume without distortion.