DSC Impassa Quick Guide
https://alpha.adt.com/help/15.html[11/8/2018 11:25:05 PM]
To disarm, enter your [security code].
For more information on this topic please visit the complete DSC Impassa manual.
Battery
The DSC Impassa operates on a 7.2V 3.6Ah battery which is only available through select retailers.
We recommend searching online or calling ahead to your local battery dealer to confirm availability.
Loss of AC power and use of backup battery power is indicated by "Loss of AC Power."
A low battery condition is indicated by "Service Required."
For more information on this topic please visit the complete DSC Impassa manual.
Bypass Protected Areas
Bypassing a zone allows you to arm your system with certain protected areas intentionally unarmed or to
access a protected area when the system is armed.
To bypass a zone, press [*] to enter the function menu.
Press [1] or [*], then your [security code].
Enter the two digit number of the zone to be bypassed or use the [<>] keys to find the zone.
Press [*] to select a zone.
To exit bypassing mode and return to Ready state, press [#].
To unbypass a zone, simply arm and disarm your system.
For more information on this topic please visit the complete DSC Impassa manual.
Change Date and Time
Press [*] + [6] + [Master security code] to enter the programming menu.
Use [<>] to find [Time and Date Programming], then press [*].
Enter the time in 24-hour format, i.e., 16:30 for 4:30pm.
Enter the date in MM:DD:YY format, i.e., 03/02/15 for March 2, 2015.
Press [#] to exit.
Chimes and Beeps
When your system is in chime mode, a chime alert will sound three tones whenever a protected
door/window is opened.
To turn the door chime function on or off, press and hold the [Chime] key for two seconds or press
[*] + [4].
To Next Page
Loading...
Need help?
General
