ADT DSC Impassa - User Manual

DSC Impassa Quick Guide
https://alpha.adt.com/help/15.html[11/8/2018 11:25:05 PM]
DSC Impassa - Quick Guide
For a detailed review of the entire system, please view the DSC Impassa manual.
« Help Center
Arm &
Disarm the
System
Battery Bypass
Protected
Areas
Date &
Time
Settings
Chimes &
Beeps
Reset Security
Codes
Trouble
Conditions
Volume
Arm and Disarm
Arm:
To arm all sensors in AWAY mode when you are leaving the premises, press and hold [AWAY].
To arm all sensors in STAY mode when you are not leaving the premises, press and hold [STAY] +
[security code].
To Quick Arm, press [*] + [0]. To enable or disable the Quick Arm feature on your device, enter [*] +
[9] + [Master Code] + [4].
Disarm:
Select

Summary

Arm and Disarm the System

Arm System

Instructions for arming the system in AWAY or STAY modes, and Quick Arm feature.

Disarm System

Instructions for disarming the system using a security code.

Battery Information

Bypass Protected Areas

Change Date and Time

Chimes and Beeps

Reset Procedures

Security Codes and Attributes

Programming User Codes

Steps to program, change, or erase access codes for users.

User Attributes

Assigning attributes like Supervisor or Duress to user codes.

Trouble Conditions

Volume Adjustment

ADT DSC Impassa Specifications