DSC Impassa Quick Guide
https://alpha.adt.com/help/15.html[11/8/2018 11:25:05 PM]
Return to Top
Bypassing
Can manually bypass zones and arm/disarm the system. [3]
Onetime
User Code
Can disarm the system once per day. Reset daily at midnight. [8]
For a complete list of User Code Attributes please see the DSC Impassa manual
.
Trouble Conditions
Your security system is able to automatically test itself for power failures, low batteries, nonworking
sensors, and communication troubles with the central monitoring station. When a trouble condition is
detected, the trouble indicator will turn on and the keypad will beep every 10 seconds. Press [*] and [2]
to view the trouble condition. The trouble indicator will flash. Use the [<] [>] keys to view troubles.
To silence trouble beeps, press [#].
For a complete list of Trouble Conditions, please refer to the DSC Impassa Troubleshooting
page.
Volume
The buzzer provides audible confirmation that a command to the panel has been executed.
The buzzer has 21 different levels of volume.
To adjust the buzzer level, press [*] + [6] + [Master code].
Use the [<>] buttons to scroll to [Buzzer Control], then press [*] to select.
Use the [<>] to scroll to the desired level, then press [#] to exit.
To disable the buzzer, choose level [00].
To Previous Page
Loading...
Need help?
General
