ADT GE Concord 4 User Manual

GE Concord 4 Touchscreen Quick Guide
https://alpha.adt.com/help/142[11/12/2018 10:32:56 PM]
GE Concord 4 Touch Screen - Quick Guide
For a detailed review of the entire system, please view the GE Concord 4 Touchscreen manual.
« Help Center
Arm & Disarm the
System
Bypass Protected
Areas
Chimes & Beeps Reset Volume
Arm and Disarm
Arm:
To arm all sensors in AWAY mode when you are leaving the premises, press the [Arm] icon, then
select the [Arm to Away] icon.
Enter your [security code] and then select [Done].
To arm all sensors in STAY mode when you are not leaving the premises, press the [Arm] icon, then
select the [Arm to Stay] icon.
Disarm:
Select

ADT GE Concord 4 Specifications

General

Brand	ADT
Model	GE Concord 4
Category	Touch Panel
Language	English

Summary

Arm & Disarm the System

Arming the System

Instructions for arming the system in AWAY and STAY modes using the touchscreen.

Disarming the System

Instructions for disarming the system by entering a security code via the touchscreen.

Bypass Protected Areas

Bypassing a Zone

Steps to bypass a specific zone on the system via the Advanced Screen.

Unbypassing a Zone

Procedure to unbypass a zone by arming and then disarming the system.

Chimes and Beeps

Chime Mode Operation

How to turn chime mode on and off to alert for protected door/window openings.

Reset

Clearing the Display

How to clear the display after an alarm event by arming and disarming.

Volume Control

Key Click Adjustment

Instructions to enable or disable the sound of key clicks on the touchscreen.