ADT On-The-Go User Manual

Step 2:
Connect the Cradle Charger
• Plug the power cord into the
slot on the back of the Cradle
Charger, making sure that the
narrow side is on the bottom.
Step 2 Cont’d
• Plug the other end of the power cord
into an electrical outlet that is not
controlled by a light switch.
• The green LED light on the plug of the
power cord should illuminate.
Step 1:
Select a Location
• Place the Mobile Device cradle
charger near the center of your home
or in your bedroom.
• Place it near an electrical outlet.
Thank you for choosing this ADT Medical Alert System. ADT is
the most trusted name in security, with 140 years of experience.
Live more confidently knowing that this system is ready 24/7/365.
At the press of a button, a trained ADT professional can speak to
you and get help if needed.
Quick Installation Guide
Step 3:
Call ADT
®
to Activate
your System
• Call 800.568.1216 and select option 1.
ADT_Install_Guide_Brochure_On_the_Go_System_021015_rd4.indd 2 2/10/15 4:51 PM

ADT On-The-Go Specifications

General

Brand	ADT
Model	On-The-Go
Category	Security System
Language	English