ADT Safewatch Pro 3000EN User Manual

– 9 –
$ERXW7KH7RXFKSDGV&RQWLQXHG
(QJOLVK'LVSOD\7RXFKSDG
AWAY:
All burglary zones, interior and
perimeter, are armed.
STAY:
Perimeter burglary zones, such as
protected windows and doors, are
armed.
INSTANT:
Entry delay is turned off:
Lit with STAY = Instant mode
Lit with AWAY = Maximum mode
ALARM
FIRE
AWAY
BYPASS
STAY
CHECK INSTANT
NO AC
TEST
NOT READY
CHIME BAT
ENGLISH DISPLAY TOUCHPAD
BYPASS:
This appears when one or more burglary protection zones have been
bypassed.
NOT READY:
Appears when burglary portion of the system is not ready for arming
(due to open protection zones). The system is ready to arm when this
message disappears and the READY indicator light comes on.
NO AC:
Appears when AC power has been cut off. System is operating on
backup battery power.
AC:
Appears when AC power is present.
CHIME:
Appears when the CHIME feature is activated.
BAT:
Low battery condition in a wireless sensor (if zone number displayed)
or low system battery (if no zone number displayed).
ALARM:
Appears when an intrusion has been detected and the system is armed
(also appears during a fire alarm or audible emergency alarm).
Accompanied by the protection zone in alarm.
CHECK:
Appears when a malfunction is discovered in the system at any time or
if an open is detected in a FIRE zone at any time or a fault in a
DAY/NIGHT burglary zone during a disarmed period. Accompanied by
a display of zone number in trouble.
FIRE
: Appears when a fire alarm is present. Accompanied by a display of the
zone in alarm.
A FIRE display also appears when a fire alarm is manually activated,
accompanied by a display of emergency key zone number programmed
for fire.

ADT Safewatch Pro 3000EN Specifications

General

Brand	ADT
Model	Safewatch Pro 3000EN
Category	Security System
Language	English