ADT Safewatch QuickConnect Plus User Manual

– 30 –
USER FUNCTIONS
Speaker Phone Feature
ADT Safewatch

QuickConnect
Security System Speaker Phone Functions
To place a call using the Speaker Phone:
[#] + AUX and dial the desired phone number.
To answer a call using the Speaker Phone: [#] + AUX
To flash (switch between two calls using call waiting):
AUX
To hang up:
OFF
To activate/deactivate (toggle) ringer: [#] + VOLUME + AUX
To return the keypad to telephone mode after disarming the system: [#] + AUX
NOTES: (1) The speaker phone ringer can only be enabled/disabled when the speaker phone mode is not active. The
system will ring once to confirm the ringer is enabled. Entering
[#] + VOLUME + AUX a second time
will disable the ringer. No ring will confirm that the ringer is disabled.
(2) The speaker phone ringer will not ring when an alarm, trouble or entry/exit delay are sounding.
(3) The ADT Safewatch

QuickConnect Security System speaker phone does not provide a “hold” feature.
NOTE
If you are using pulse (rotary)
dialing, allow enough time for the
system to finish dialing the last
digit you dialed, (listen to pulses)
before dialing the next digit.

ADT Safewatch QuickConnect Plus Specifications

General

Brand	ADT
Model	Safewatch QuickConnect Plus
Category	Security System
Language	English