ADT Safewatch User Manual

– 40 –
Summary of Audible Notification
Summary of Audible NotificationSummary of Audible Notification
Summary of Audible Notification
Additional Announcements:
Pressing STATUS key once will announce the following primary messages, depending on
the system’s status at the time:
Disarmed–Ready to Arm [check system]
Disarmed [not ready to arm]
Armed [away] [stay] [check system] [exit now]
Pressing the STATUS key twice will announce the following secondary messages, depending
on the system’s status at the time:
Fire Alarm + zone voice descriptor
Alarm + zone voice descriptor
Carbon Monoxide Alarm + zone voice descriptor
Carbon Monoxide Fault + zone voice descriptor
Fire Fault + zone voice descriptor
Fault + zone voice descriptor
Low Battery + zone voice descriptor
System Low Battery
Check System
AC Loss
Zones Bypassed
Chime
NOTE: If there are no secondary messages, the primary status messages will be announced.
LED Meanings
ARMED LED: ON = System armed
(Red) OFF = System disarmed
Blinking = System armed, but a fault exists or once per second when AVM (VOX or
Talk) or speaker phone mode is active.
READY LED: ON = System disarmed, ready to arm
(Green) Blinking = System disarmed, not ready to arm (a fault exists) or once per second
when AVM (VOX or Talk) or speakerphone mode is active.
NOTE: When the system is armed, the READY LED turns off.

ADT Safewatch Specifications

General

Manufacturer	ADT
Monitoring	24/7 Professional Monitoring
Type	Security System
Power Source	Battery and AC Power
Connectivity	Cellular, Broadband
Sensors	Door/Window, Motion, Glass Break, Smoke, Carbon Monoxide
Compatibility	Amazon Alexa
Remote Access	ADT Mobile App
Voice Control	Yes, via Google Assistant and Amazon Alexa