EasyManuals Logo

ADT SafeWatch 3000 User Manual

ADT SafeWatch 3000
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
www.adt.com
BATTERYREPLACEMENTINSTRUCTIONS
ForSafeWatch
®
3000,Vista10,Vista20,Concord4,ConcordExpress,
DSC1555andDSC1616ResidentialControlPanels
The ADT SafeWatch
®
3000, Vista, Concord and DSC residential security systems
have a backup battery designed to supply power to the security system during a
limited power outage. The battery, much like a car’s battery, must be replaced from
time to time due to age and usage. The backup battery needs to be replaced when
the keypad displays a “BAT” or “SYSTEM LO BATTERY” message.
In most cases you can replace the battery yourself, typically saving you time and
money. The process requires the removal of two wires from the old battery and
reconnecting the same wires to the new battery. Before replacing the battery, please
read these instructions carefully, including the Battery Safety Warning instructions
below.
BatterySafetyWarning
Thissection on Battery Safety should be read in its entirety and its contents understood before
handlingorusingarechargeablesealedleadacidbattery.
Duetothepotentialenergystoredinasealedleadacidbattery,improperhandlingoruseof
thebatteryorfailuretoobservetheprecautionslistedinthisdocumentmayresultinbodily
injurycausedbyelectrolyteleakage,heatgenerationorexplosion.
USE ELECTRICALLY INSULATED TOOLS. Use of uninsulated tools may cause a short circuit
and the heat or sparks generated by the short circuit can result in burns, damage to the
battery,oranexplosion.Metallictoolsmaybeinsulatedusingvinylorelectrician’stape.
Whenunpackingthebattery,makesuretohandleitgently.Roughhandlingmayshockthe
battery,causingdamage.Checkthatthebatteryisfreefromcracks,fractures,orleakage.
Beextremelycarefulnottodropthebatterytoavoidthepossibilityofseriousinjury.
If at any time you feel uncertain that you can follow these instructions or want to
have the battery replaced by an ADT service technician, contact the ADT
Customer Care Department at 1-800-ADT-ASAP and schedule a service
appointment. In most cases, ADT’s standard service charge will apply.
Requesting a Replacement Battery
If you choose to replace the battery yourself, contact ADT at 1-800-ADT-ASAP to have
a replacement battery sent to you or you can purchase one at a local battery supply
store. If there is a lock on the control panel door and you do not have a key, inform
the ADT Customer Care Representative and a key will be sent to you.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ADT SafeWatch 3000 and is the answer not in the manual?

ADT SafeWatch 3000 Specifications

General IconGeneral
BrandADT
ModelSafeWatch 3000
CategoryControl Panel
LanguageEnglish

Related product manuals