ADT 2 Gig Go! Control User Manual

2 Gig Go! Control Quick Guide
http://alpha.adt.com/help/280[11/14/2018 8:14:39 PM]
2 Gig Go! Control - Quick Guide
For a detailed review of the entire system, please view the 2 Gig Go!Control manual.
« Help Center
Arm &
Disarm
Battery Bypass
Protected
Areas
Date &
Time
Settings
Chimes &
Beeps
Reset Security
Codes
Trouble
Conditions
Volume
Arm and Disarm
Arm:
To arm all sensors in STAY or AWAY mode:
At the Home screen, press [Security > Arm].
Enter your [security code].
Press the [STAY] or [AWAY] button.
Disarm:
Select

ADT 2 Gig Go! Control Specifications

General

Touchscreen	Yes
Z-Wave	Yes
Two-way voice	Yes
Battery Backup	Yes
Color	White
Cellular Communication	Yes
Siren	Yes
Compatibility	Z-Wave devices
Power Source	Plug-in
Dimensions	1.5 inches
Battery Life	24 hours

Summary

Arm and Disarm

Arming the System

Instructions to arm the system in STAY or AWAY mode by pressing Security > Arm, entering a security code, and selecting the STAY or AWAY button.

Disarming the System

Instructions to disarm the system by pressing DISARM on the Security or Menu Screen and entering a valid security code.

Battery Information

Bypass Protected Areas

Change Date and Time Settings

Chimes and Beeps Configuration

System Reset Procedure

Security Code Management

Trouble Conditions

Volume Adjustment