ADT Unimode 9600 User Manual

U n i m o d e 9 6 0 0
Addressable Fire Alarm Control Panel
Programming, Installation, Maintenance
and Operating Instruction Manual
ADT Security Services, Inc.
One Town Center Road
Boca Raton, FL 33431
Phone: (561) 988-3600
FAX: (561) 988-3675
IMPORTANT! The Signaling Line Circuit Wiring Manual Document #51520 must be referenced in
addition to this manual when installing or servicing the Fire Alarm Control Panel.
P/N 51336:C ECN 01-535
Document #51336
11/06/01 Revision:
C

ADT Unimode 9600 Specifications

General

Brand	ADT
Model	Unimode 9600
Category	Control Panel
Language	English

Summary

SECTION 2: Installation

2.1 Mounting

Details procedures for physically mounting the FACP cabinet and internal circuit board.

2.2 Power

Covers AC power, earth ground, and battery power connections and safety.

2.5 UL Power-limited Wiring Requirements

SECTION 3: Programming

3.2 User Programming

Details user programming methods, accessing modes, and password protection.

3.6 Master Programming Level

Explains navigation and utilization of the Master Programming Level for system configuration.

3.6.1 Point Program

Covers adding, deleting, and editing addressable device settings like detectors and modules.

3.6.2 Zone Setup

3.6.4 System Setup

3.6.8 Walktest

SECTION 4: Operating Instructions

4.1 Panel Control Buttons

4.4 Trouble Operation

4.5 Alarm Operation

Details system response, display information, and LED indications during an alarm event.

4.21 Walktest

SECTION 5: Power Supply Calculations

5.2 Calculating the AC Branch Circuit

5.3 Calculating the System Current Draw

5.4 Calculating the Battery Size