Alarms
If the alarm is triggered the IQ Panel will sound the
siren and display a red alarm screen.
Police
When the system is armed and the alarm
is tripped or you touch the “Police”
emergency button the alarm sounds with
the “Intrusion” siren
Note: If the system is Keyholder Response
only this option will not be available.
Fire
When a Smoke or Carbon Monoxide
detector is triggered or someone taps
the “Fire” panic on the IQ Panel the
alarm sounds with the “Fire” siren.
Emergency
When you press an IQ Pendant or
trigger an emergency signal from the
IQ Panel, the alarm sounds with the
“Emergency” siren.
The ADT Smart Home Hub will automatically contact
the ADT Monitoring Centre using the Dual Path LTE &
Wi-Fi connection.
Preventing false alarms:
False alarms can be an inconvenience and potentially a waste of
emergency response resources. ADT has designed and installed
your system to reduce the potential for false alarms, here are
some tips to avoiding them.
Here’s some tips for avoiding false alarms:
-Use your system regularly, be comfortable with its operation.
-Make sure everyone who has access to your home has a valid
access code and is familiar with how to use the system.
-Ensure the doors you use the most are set up with delays to give
you enough time to disarm the system when you open a door.
-Test your system regularly
-Develop a routine.
-Use alternative methods for arming and disarming (mobile app,
bluetooth disarming, etc.)
To Next Page
Loading...
Need help?
General
