The Service Number or Program Number in
PAT & PMT packets identifies which program
is associated with which Video & Audio PIDs.
This value should be entered in decimal
format
This setting allows you to set the logical
channel number that will be used to tune
in with a set top box or television. This
setting is only valid with DVB table
generation.
Bars, Tones and Service ID information
can be overlayed on top of valid video by
selecting the desired combination from
this menu.
Note: When an audio input / channel is
configured for Pass through operation
Internal tone generation does not
function for the pass through channels.
Bars Mode: ON,
OFF
Bars Type:
BARS, Solid
color, FLASH
Tones Mode:
ON, OFF
OSD Mode: ON,
OFF, BLINK
Important: setting the Major Channel Number to zero (0) will equate to setting a single-part
channel number in ATSC applications.
To Next Page
Loading...
