3) Video Input State: This quick view displays the resolution, input signal source, and
input signal mode for both encoder modules.
4) Video Encoding State: This quick view displays the Video Bit Rate, CODEC, and Chroma
type for both encoder modules.
5) Audio Encoding State: This quick view displays the type of Audio Encoding and the bit
rate for both encoder modules. Service 1 statistics are the first line of information. Service
2 statistics are the second line of information.
6) PID Statistics: This quick view displays the Video and Audio PIDs for both encoder
modules. Service 1 PIDs are the first line of information. Service 2 PIDs are the second line
of information.
7) TSoIP State: This quick view displays the status of IP Transport mode, RTP, FEC mode,
and number of selected services. Up to 4 destination IP addresses can be sent
simultaneously.
To Next Page
Loading...
