Need help?Do you have a question about the Advanced PureAir Air Purifier NEWPORT 9000 and is the answer not in the manual?
General| Model | NEWPORT 9000 |
|---|---|
| Type | Air Purifier |
| Filtration Technology | HEPA, Activated Carbon, UV-C Light |
| Filter Replacement Indicator | Yes |
| Warranty | 3 years |
| Ozone Output | <0.05 ppm (in compliance with safety standards) |
Details the front face plate of the air purifier, including air outlet and inlets.
Explains the soft touch control panel with its various indicators and buttons for operation.
Details the functions and buttons available on the included remote control.
Illustrates the rear of the air purifier, highlighting the carrying handle and purified air outlet.
Presents an exploded view of the unit, detailing internal components like filters and sensors.
Instructions for ventilating the area before plugging in and operating the air purifier.
Describes the function and behavior of the negative ion indicator on the control panel.
Details the odor indicator, which glows when the odor sensor detects smells.
Explains the dust and irritant indicator that lights up when dust or irritants are detected.
Details the air quality surveillance function and how LEDs indicate pollution levels.
Provides guidance on where to place the air purifier for optimal performance and safety.
Instructions on how to plug in, turn on, and turn off the Newport 9000 air purifier.
Explains the five different fan modes (Quiet, Low, Med, Hi, Auto) available for operation.
Details how the unit operates automatically, adjusting fan speed based on air quality.
Describes how to set the operation timing using the AUTOTIMER function and its modes.
Provides a step-by-step guide for disassembling the air purifier for cleaning or maintenance.
Details routine cleaning procedures for various components like filters, sensors, and the unit body.
Step-by-step instructions for cleaning the washable plasma dust filter, including pre-soaking and drying.
Guidance on when and how to replace filters in the air purifier.
Information on the lifespan of the UV lamp and instructions for its replacement.
Instructions on how to reset the 'Clean Metal Grid' and 'Replace Filter' indicators after maintenance.
Addresses common questions regarding the air quality surveillance indicator and sensor behavior.
Explains why the dust and irritant sensor might blink or have reduced sensitivity.
Discusses potential issues with the odor sensor not working correctly and how to retrain it.
Addresses why filters might struggle to remove dust and odors, suggesting reversed installation.
Explains difficulties in eliminating dust and odor, possibly due to dirty wires or disconnection.
Troubleshoots why the unit may not power on after being plugged in or reassembled.
Provides contact information for product malfunction and servicing inquiries.
Outlines the limited warranty coverage, exclusions, and conditions for the air purifier.
To Next Page
