Advanced MxPro4 Installation Sheet & Quick Reference Guide

Installation Sheet &
Quick Reference Guide
www.advancedco.com
683-4000 REV 01
Controls & Indications
! !
E
V
A
C
U
A
T
E
S
I
L
E
N
C
E
/
R
E
S
O
U
N
D
R
E
S
E
T
M
U
T
E
P
Q
R
S
W
X
Y
Z
T
U
V
G
H
I
J
K
L
M
N
O
D
E
F
A
B
C
T
E
S
T
D
I
S
A
B
L
E
F
A
U
L
T
S
Y
S
T
E
M
F
A
U
L
T
S
O
U
N
D
E
R
D
I
S
A
B
L
E
D
S
O
U
N
D
E
R
S
I
L
E
N
C
E
D
S
O
U
N
D
E
R
F
A
U
L
T
P
O
W
E
R
D
E
L
A
Y
E
D
F
I
R
E
Navigation Buttons


Press to scroll through Menu Options.
Press to display more information.


Press to scroll through menu Options.
Press to scroll through lists of zones or devices.

Press to confirm entry of numeric or letter information
entry.
Press to confirm selection of a menu option.
Press to change some of the configuration options.
Number Buttons
to
9
wxyz
0
Used to enter numbers or letters.
Esc
Press to return to a previous menu.
Press to exit the menu functions and return to the
normal display.
The panels may be fitted with separate zone fire indicators comprising of
20, 50, 100 or 200 red indicators – these show the zones in a fire alarm
condition.
In addition, the panels may be fitted with separate indications showing the
loaction of fire alarms in a pictorial display (mimic diagram).
Menu
Press to show or return to Level 1 or Level 2 Menu
Functions.
Main User functions are VIEW, TEST, DISABLE &
ENABLE.
Graphic Display
Control Buttons
The graphical display provides detailed information of the source of fires,
faults and warnings. It also shows menus for use when inspecting or
programming the operation of the panel.
Under normal conditions the panel display shows the time, date and
status: -
Reset: Press to reset the panel from a latched
condition.
Mute: Press to mute the internal buzzer.
LEVEL 2
16:05
04 MAR 2006
Silence / Re-sound: Press to silence the bells. Press
again to re-sound the bells.
Evacuate: Press to initiate a manual evacuation and
sound the alarms.
NORMAL PANEL OPERATION
(Press Menu to View)
Level 2 Access is required for Reset, Silence / Re-sound &
Evacuate buttons and for programming Menu functions. Level 2
operation can be enabled using a key-switch (if fitted) or by entry
of a pass-code.
The following is a typical menu display.
LED Status Indicators
[Level 2 Menu]
VIEW DISABLE ENABLE
TEST PRINT COMMISSION
STATUS
RED
Separate LED Indicators show the presence of a fire
alarm condition and (if configured) that the fire brigade
has been called.
YELLOW
Indicate other system operating conditions including
Fault, Test and Disablement conditions.
GREEN
Indicates the presence of power to the system – if
flashing, indicates that the panel is running on battery
standby power.
In the event of a fire alarm, call: -
For Service & Maintenance, contact: -
TEL:
TEL:
Graphic Liquid
Crystal Display
Navigation
Buttons
LED Status
Indicators
Control
Buttons
Number and
Letter Buttons
For full installation & commissioning information see document 680-014
For full operating instructions see document 680-015
www.advancedco.com/advanced-360-portal/premium-documents.aspx

Advanced MxPro4 Specifications

General

Brand	Advanced
Model	MxPro4
Category	Control Panel
Language	English