7 Chapter 2
2.1.2 Network Connection
When using the ADAM-4561, you will simply plug one end of USB cable
(included in package) into ADAM-4561, and the other end into the USB
hub or your host PC.
2.1.3 Serial Connection
The model of the ADAM-4561 that you purchased has 10 pin connector
for connecting serial ports on the bottom of module. Only one set of
twisted-pair cables is required to transmit both Data and RTS signals for
RS-485 interface.
Wiring for RS-232 Connection
Figure 2.2: Wiring of RS-232 Connection
Note: In USB standard, if you have used the COM3,
COM4...COMn of host PC. When you plug
ADAM-4561 in the host PC, the COM, port will
be COMn+1.
To Next Page
Loading...