ADAM-4561 User Manual 10
2.2 Software Installation
2.2.1 Driver and Utility Installation
In order to use a PC to control serial devices connected to the ADAM-
4561, you must first have a host running Windows 2000/2003/XP/Vista.
Following are the installation instructions to set up the ADAM-4561.
Firstly, insert ADAM CD into the CD-ROM drive on the host PC and find
“CP210x_VCP_Win_XP_S2K3_Vista_7.exe” file from the link of
folder ADAM-4561 Driver. Double click
“CP210x_VCP_Win_XP_S2K3_Vista_7.exe” and start to create the
driver for ADAM-4561 as the instructions of Step1 to Step 5. Then, plug-
in the ADAM-4561 to USB port on your PC to finish the setting of
ADAM-4561.
Step 1: Double click “CP210x_VCP_Win_XP_S2K3_Vista_7.exe”
Note 1: ADAM-4561 driver is available for Microsoft Win-
dows 2000/2003/XP/Vista/7 (32bit and 64bit).
Note 2: Do not connect the ADAM-4561 until the driver
has been installed.
To Next Page
Loading...