2-3 Selecting Operator Interface
To complete your data acquisition and control system, selecting the operator interface is necessary.
Adopting by Modbus/TCP Protocol, ADAM-6000 I/O modules exhibit high ability in system integration for
various applications.
If you want to read the real-time status of ADAM-6000 modules through the web page from anywhere
without any engineering effort, there are many Internet browser software:
Internet Explorer, Netscape, and other browser with JAVA Machine…
If you want to develop your own web pages in the ADAM-6000 modules, the JAVA Script will be the
quick and easy programming tool to design a specific operator interface.
J2EE Development Kit
If you want to integrate ADAM-6000 I/O with HMI (Human Machine Interface) software in a SCADA
(Supervisory Control and Data Acquisition) system, there are a lot of HMI software packages, which
support Modbus/TCP driver.
Advantech Studio
Wonderware InTouch
Intellution Fix of i-Fix
Any other software support Modbus/TCP protocol
Moreover, Advantech also provides OPC Server, the most easy-to-use data exchange tool in worldwide.
Any HMI software designed with OPC Client would be able to access ADAM-6000 I/O modules.
Modbus/TCP OPC Server
If you want to develop your own application, the DLL driver and ActiveX will be the best tools to build up
user’s operator interface.
ADAM-6000 DLL driver
ADAM-6000 ActiveX
With these ready-to-go application software packages, tasks such as remote data acquisition, process
control, historical trending and data analysis require only a few keystrokes.
To Next Page
Loading...
Need help?
General
