In addition to monitor the current DI/DO status, the Windows Utility offers a graphical operating interface
as figure 5-10. You can read the Digital input status through the change of the indicator icons.
Oppositely, you can write the digital output status through clicking the indicator icons.
Figure 5-10 Operating and Indicating Icons
Note1 The indicator icons are only available to click for digital output channel.
2 The hexadecimal code will be calculated automatically for any status.
With intelligent design concept, the digital input channels support counter and signal latch functions.
Click the specific channel, there will be four working modes for choosing.
Figure 5-11 General Digital Input Mode
To Next Page
Loading...
