5-3-6 Security Setting
Though the technology of Ethernet discovered with great benefits in speed and integration, there also
exist risk about network invading form anywhere. For the reason, the security protection design has
built-in ADAM-6000 I/O modules. Once user setting the password into the ADAM-6000 firmware, the
important system configurations (Network, Firmware, Password) are only allowed to be changed by
password verification.
Figure 5-23 Password Setting
Note: The default password of ADAM-6000 is “00000000”. Please make sure to keep the correct
password by yourself. If you lose it, please contact to Advantech’s technical support center for
help.
To Next Page
Loading...
